DPF100
The first dedicated tester to check for the minute particles which should be collected by a fully functioning DPF
Contact UsCan be operated in stand alone mode to give GOOD/ MARGINAL/POOR result using the built in LEDs or with an Android tablet providing comprehensive graphical indication of DPF performance during the test. Individual tests can be logged and printed along with relevant vehicle details when used with the tablet
Dimensions
520mm H x 650mm W x 280mm D
(including sample hose)
Stand footprint 270mm x 270mm
Weight
8.13 Kilos
Stand height adjustment
150mm - 450mm
Sample hose
500mm long x 30mm diameter J20 R3 rubber
500mm extension with coupler
Ambient operating temperature
0° C - 40° C.
Operating Principle
Measurement of PM using light scattering
Current consumption
4A at 12V DC maximum. Average current is largely determined by ambient temperature
Particle size range
0.30μm to >10μm. Sensitivity is reduced by 50% at 0. 30μm
Sensor life
Approximately1500+tests. Sensor life is dependent on cumulative exposure
User controls
START button